AK Series 14kW Steam Shower Generator

The Amerec AK14 is engineered for home and day spa steam baths up to 550 adjusted cubic feet (ACF).

The Amerec AK14 steam shower generator is constructed of durable stainless-steel for years of reliable, efficient operation. The AK14 includes industrial-strength heating elements, durable electronic components and parts, electronic water-level control system, and several other innovative components.

Amerec AK Series steam generators are designed to provide the most consistent temperature during the steam bath. The AK14 steam unit uses a Sequential Temperature which ensures a consistent flow of soft steam and a more pleasurable bathing experience.

The Amerec AK14 steam shower generator is engineered for long-lasting performance and durability. The unit is equipped with a corrosion-resistant stainless-steel tank, water level probes, and removable heating elements for easy and economical service.

The compact size of the AK14 allows the steam shower unit to be installed conveniently out of sight in closets, vanities, cabinets, and other similar locations.

The Amerec AK14 14kW steam generator is available in 240V or 208V and can be field wired for single-phase or three-phase configurations.

The Amerec AK14 generator is engineered to power the most demanding home and commercial steam room environments. Homeowners, health clubs, and day spas rely on the Amerec AK Series generators for dependable daily use.

Amerec AK Series residential steam shower generators can be linked in tandem to accommodate steam shower enclosures larger than 550 adjusted cubic feet. Connection cables are sold separately, and each generator requires a ComfortFlo steam head.

The Amerec AK14 steam bath generator requires the available K3 control for operation which regulate bathing duration and temperature, or the R30K 30-minute timer. Each control package includes a matching finish ComfortFlo steam head. The AK14 requires the purchase of a second ComfortFlo steam head.

We recommend Amerec's Automatic Drain System with your AK14 which drains the generator tank after each use to help prevent lime-build up and calcification of the unit.

The Amerec AK14 steam room generator carries a limited lifetime warranty and is fully serviceable. Amerec AK series generators are UL, CSA, and CSE listed to ensure your safety.

Features

• Sequential temperature control for consistent flow
• Stainless steel tank
• Industrial grade, serviceable heating elements
• Durable electronic components
• Electronic water-level control system
• Low voltage safety control circuits
• Available Auto Drain automatic draining system
• Ability to field wire phase
• Ability to connect multiple generators to heat steam baths larger than 550 cubic feet
• Operates with inside/outside shower, on/off, time/temperature controls
• Full 3/4" port drain valve
• ASME safety valve
• UL/CSA/CE listed

Includes

• 14KW steam bath generator
• Installation and operation manual
• Limited warranty

Specifications

• Model: AK14
  
• Minimum Adjusted Cubic Feet: 350
  
• Maximum Adjusted Cubic Feet: 550
  
• Kilowatt Rating (KW): 14kW
  
• Shipping Weight (Lbs.): 35 lbs
  
• AC Voltage: 240V AC
  
• DC Voltage: 5V DC
  
• Phase: Single Phase
  
• Nominal Amperage: 21/38Amps
  
• Recommended Protective Device: 30/50 Amp
  
• Recommended Minimum Copper Wire Supply: 10/8 AWG
  
• Water Supply Connection: 3/8" NPT
  
• Generator Steam Line Connection: 1/2" NPT
  
• Steam Head Connection: 1/2" NPT
  
• Drain Connection: 3/4" NPT
  
• Safety Relief Valve Connection: 3/4" NPT
  
• Safety Relief Valve PSIG: 10 PSIG
  
• Control "Rough In" Cut Out: 2-3/8" Diameter
  
• Control Sensor Cable: 25', 2 Conductor, 22 AWG, Shielded Cable
  
• Control Sensor "Rough In" Cut Out: 7/8" Diameter
  
• Generator Control Connection: 8 Pin, Snap-In Connector
  
• Generator Control Cable: 25', 8 Conductor, 28 AWG, Shielded Cable
  
• Width In Inches: 16-1/2"
  
• Depth In Inches: 6-1/4"
  
• Height In Inches: 15"

Technical

INSTALLATION & OPERATION MANUAL.pdf

Amerec Limited Warranty.pdf

Required for Operation

K2, K3, KT3, K4